| Onze
Producten |
|
|
|
| Onze
Handleidingen
|
|
|
|
| Wat is er
nieuw |
|
|
|
|
|
|
|
|
COMET
CFM-95SL
|
|
5/8 wave FM omnidirectional
antenna
You've been asking for
it and now its here. Finally a quality FM antenna at a reasonable cost.
The Comet 5/8 wave antenna is professional quality, commercial grade antenna
that offers 3.4dBi of gain. Designed with needs of the low power broadcaster
in mind, the model CFM-95SL provides exceptional quality and performance
with an unbeatable price. This antenna comes with our Precise manufacturing
and excellent technical characteristics make this antenna a recommended
aerial for all MAX series FM transmitters.
Features:
Frequency range:
88-110MHz (Tunable)
Impedance: 50 ohms
SWR: 1.5:1 max
Gain: 3.4dBi
Bandwidth: 3 MHz
Max. power: 200 Watts
Length: 4'8" - 6' 1"
Weight: Approx.
2.5 Lbs
Connector: SO-239
Max. wind speed: 134 mph
Mast diameter: .9-2.25"

To purchase a SWR meter or coaxial cable check under accesories!
|
|
|
|
STACKED DIPOLE ANTENNA
|
|
Dipole antenna (single or phased configurations)
Our choice for broadcasts of up to 300 Watts. Weather sealed for long term durability in all climates. DC short for lightning and static protection. Comes supplied with boom arm.
The folded dipole is the perfect antenna for stations that require a truly professional antenna for their broadcasting. No tuning or adjustment is needed for any frequency on the band which makes this antenna the only one to use if you plan to move your transmitters frequency often. Completely hermetically sealed with a full all weather warranty - you can be sure this antenna won't let you down, making it our choice for commercial sites where access is difficult.
For higher power handling you can stack these antennas with the 2 and 4 way phasing harness' to make 2 and 4 bay antenna systems easily handling over 1KW of power.
Technical specifications:
MAX Power handling: 300 Watts for single dipole, 600W for two and 1200 for 4 bay version
Impedance: 50 ohms
Gain: 0dBd (single)
VSWR: better than 1:1.5 (88-108MHz)
Freq. range: 88-108 MHz(no tune)
Connector: N-type Male
Dimensions: 1600mm(height) x 150mm x 35mm
Weight: 2Kg
|
|
|
|
HIGH
GAIN 3/4 wave vertical
|
|
HIGH GAIN 3/4 wave
FM omnidirectional antenna
This is a redesigned standard 3/4 wave antenna to provide
even higher gain. Preliminary testing of the antenna indicated a small
increase in gain could be seen when the main radiator was made a little
longer then the calculated 3/4 wavelength. This adds inductive reactance
to the antenna and a few tenths of a db in gain once the gamma match has
been retuned to 50 ohms impedance. We knew the increase in gain would
be small by making the antenna longer and if we passed the optimal length,
we would destroy the antennas performance altogether. We decided it would
be worth the time to conduct further field tests and find this ideal length
to extract every last bit of performance possible from any single omni
directional antenna offered on this band. Using our exclusive formula
we can now calculate the ideal length that provides maximum gain based
on our customers frequency. High performance 3/4 wave antennas are not
typically seen on any band because the 3/4 wave presents some interesting
problems when it comes to impedance and angle of radiation. The typical
90 and 45 degree downward radials used on most smaller ground planes are
capable of providing a good 50 ohm impedance but they also give a very
high angle of radiation when used on the 3/4 wave. This wastes the added
gain of the 3/4 wave by allowing a good deal of your signal to go up rather
then out. Our innovative cone shaped ground plane structure on the 3/4
wave overcomes this problem and will refocus the energy so that it projects
out into the distance and not up into space. A quick look at the picture
showing the radiation patterns will make it easy to understand how this
affects range when compared to other antennas. Our 3/4 wave has an impressive
gain figure better then 6 db over a half wave dipole and more then 9 db
over a circularly polarized antenna. The typical 100 watt LPFM station
using a circularly polarized antenna has to run the transmitter at about
225 watts output in order to achieve the 100 watt ERP level because the
CP antenna has -3.2 dbd. Since our antenna has a power multiplication
factor of four times you would only need 25 watts of RF to reach the full
100 watt ERP level! This can provide a significant savings since many
exciters produce 25 watts and would not require the expense of an RF power
amplifier. The antenna uses a highly efficient Teflon insulated gamma
match that eliminates any coils or matching transformers and allows us
to shunt feed the 3/4 wave main radiator while keeping it DC grounded
for added lightning protection. Another advantage this antenna has is
it's ability to handle high power levels. The weakest link in the chain
is the coax connector and our standard model offered in this auction uses
a gold pin Teflon insulated weatherproof N connector recommended for up
to 1 KW. A simple $50 upgrade using a 7/8 connector brings the power handling
to 2.5 KW. For commercial operators seeking an excellent backup antenna
that can handle full power we offer a special order 10 KW version. This
model replaces the gamma match with a sealed Jennings vacuum variable
capacitor and uses an EIA flange connector making it virtually impossible
to burn out. Your antenna will be precisely tuned for your frequency and
shipped assembled so you get a perfect SWR match. You simply slide the
telescopic main radiator sections out of the base to the premarked spot,
tighten the stainless steel clamps and connect the coax. Complete instructions
are included for easy retuning in the field should your transmit frequency
make a major change in the future. We have invested lots of research and
development time into this antenna and are willing to stand behind it
with a great guarantee. If the antenna you use now didn't cost thousands
of dollars, replace it with ours. If anything should fail within two years
send it back for free repairs or retuning if you would rather us do it.
Give your signal some punch and try our antenna at no risk to you. Antena
specs are as follows. Approximate height is 9 feet (depends on frequency).
Wavelength is 3/4 wave. Gain over half wave dipole is better then 6 dbd.
Power handling capacity is 1 KW on the standard model (2.5 KW with $50
upgrade) and 10 KW on the special order high power version. Bandwidth
is 5 MHz. wide with a perfect 1:1 SWR at the center tuned frequency. Wind
survival is greater then 100 MPH. Wind load is .7 square feet. Weight
is 8 pounds. Radiation pattern is low angle omni with vertical polarization.
Antenna is DC grounded for excellent lightning protection.
Features:
Frequency range:
88-110MHz (Tunable)
Impedance: 50 ohms
SWR: 1.1:1 max
Gain: 6 db over a half wave
dipole, more then 9 db over circularly polarized antenna
Bandwidth: 5MHz, easily tunable
Max. power: 1000 Watts (with modification up to 10KW)
Length: 9 feet
Weight: Approx.
8 pounds
Connector: N
Max. wind speed: > 100 mph
Wind load: .7 square feet

To purchase a SWR meter or coaxial cable check under accesories!
|
|
|
|
BROADBAND
DIRECTIONAL YAGI ANTENNA
|
|
1/4 wave FM omnidirectional
FM antenna
The CD95Y
FM Yagi antenna from Creative Design provides 6 dB of forward gain in
a highly directional pattern with a 20 MHz bandwidth. That means NO-TUNING
is required from 88-108MHz. Typical SWR is <1.5:1 across the band.
Handles up to 500 watts. Can be mounted horizontally or vertically. Provides
a front to back ratio of >15dB! Employs DC grounding for superior lightning
protection. Constructed of high grade aluminum for excellent weather resistance.
Comes with an RG-8/U pigtail feed-line with S0-239 and mounting hardware.
Includes 1 year warranty.
Features:
Frequency Range 88-108 MHz (Broadband)
Impedance 50 Ohms
SWR 1.5 : 1 Max.
Bandwidth 20 MHz
Forward Gain 6 dB (F/B ratio 15)
Maximum Power 500 Watts
Length 5'
Weight (unboxed) Aprox. 10 Lbs
Construction Drawn Aluminum
Connector SO-239 Type
Max. Wind Speed 134 MPH
To purchase a SWR meter or coaxial cable check under accesories!
|
|
|
|
MLB-6600
|
|
1/4 wave FM omnidirectional
FM antenna
The model MLB-6600 is a quarter wave antenna
for use on the 66 to 132 MHz bands. t provides superior performance for
a variety of receive applications on the FM broadcast band while maintaining
a 200 watt power rating for transmission. Comes with 18 feet of RG8 coax
and PL-259 connector. Includes our exclusive 30-day money back guarantee
and full 1 year warranty.
Features:
Frequency Range 66-132 MHz (Tunable)
Impedance 50 Ohms
SWR 1.5 : 1 Max.
Bandwidth 3 MHz
Nominal Gain 0 dB (unity)
Maximum Power 200 Watts
Length 2' - 4'3"
Weight (unboxed) Aprox. 1.5 Lbs
Construction Stainless
Connector PL-259
Max. Wind Speed 134 MPH
To purchase a SWR meter or coaxial cable check under accesories!
|
|
|
|
RPL
0205
|
|
Directional log-periodic
wideband antenna
Precise
manufacturing, excellent technical characteristics and no-tune wideband
operation make this log-periodical aerial a recommended aerial for all
FM MAX transmitters. Remember that this is a 6-element directional aerial,
meaning it radiates most of the power in one direction. This is where
amplification comes from.

Features:
HI GAIN
6dB
WIDE BAND no-tune operation
Easy to assemble/disassemble (1/2 hour)
Attractive price
|
|